Fast Pole pole dance pole is a professional bar designed for quick removal in spaces up to 5 metres high. It is built for intensive use in studios and training rooms where safety, stability, and flexible space management matter.

The safest construction without constant pressure forces

Fast Pole stands out because both bases are fixed in the floor, and the pole is not held in place by constant pressure pushing against the ceiling. The expansion thread is used only for the initial height adjustment and vertical alignment. Once set, it does not carry training loads and does not apply pressure to the ceiling.

This makes the structure significantly safer than traditional pressure-mounted poles, especially with frequent installation and removal, and when used in spaces with wooden ceilings or underfloor heating.

Fast and secure removal – perfect for multi-purpose studios

Fast Pole allows for quick release of the pole from the bases, freeing up the space within seconds for other classes, events, or fitness training. This solution is especially valued in studios where one room serves multiple purposes.

An additional advantage is that the bases always stay in the same position – no need to use a level or control expansion pressure every time. The pole simply clicks into place, eliminating installation errors and significantly increasing safety.

Instant switch between static and spin – pin system

Switching between static and spin mode is done by removing or inserting a pin. No screws, no tools, no wasted class time. The pins are magnetic, so they won’t get lost easily and attach to the base if not stored properly.

Smooth spin and reinforced walls

Fast Pole delivers a very smooth and long spin. This is achieved through high-quality bearings and the proper weight of the pole. We do not compromise on material – the heavier the pole, the longer and more stable the spin.

For poles above 350 cm, we use reinforced walls to prevent bending and increase safety during dynamic tricks. Upon request, shorter poles can also be made with reinforced walls.

Perfect for exotic pole – no bulky floor base

Fast Pole has virtually no protruding base at floor level. This allows hands to work very close to the pole during floorwork, and platform heels won’t catch on structural elements. That’s why this model is especially appreciated in exotic pole and low choreography.

Super Poler finish – industrial-grade surface quality

The polished Fast Pole version is produced using Super Poler technology. Surface roughness is measured professionally and is approximately Ra 0.04 µm. This level of industrial precision ensures even grip along the entire pole and is gentler on the skin than standard chrome finishes.

Custom colour options available

Upon request, the pole can be powder-coated in white or black. This allows the equipment to match the aesthetic of your studio. The powder-coated version maintains the same structural strength and durability, while the coating provides slightly increased grip. Powder coating is available for an additional fee.

Fast Pole – the choice of professional pole dance studios

Thanks to its one-piece construction, reinforced walls, quick removal system, pin mechanism, and lack of constant ceiling pressure, Fast Pole is one of the safest and most frequently chosen studio poles on the market.

FAST POLE one-piece pole dance pole specifications

• Weight: 10–15 kg (depending on height)
• Load capacity: 150 kg
• Pole diameter: 42 mm
• Ceiling mount diameter: 8.5 cm
• Floor base diameter: 10 cm
• Installation/removal time: approx. 60 seconds
• Warranty period: 12 months
• Spin/static switch: via pin (installation tolerance between pin and hole: 0.5 mm). The pin is magnetic and attaches to the base.
• Material: polished stainless steel or powder-coated steel (only the pole is coated; bases are silver, permanent mount is black)
• Cleaning: cloth + any alcohol diluted 50/50 with water. Do not clean with water only or a damp cloth – black streaks may appear over time on polished poles.
• Skill level: professional
• Returns: not available (custom-made product)

We tailor the pole to your space. Simply provide the exact height from floor to ceiling (mounting point) in your order message. To compensate for minor measuring errors, we allow an adjustment range of -2 cm / +6 cm. This ensures a perfect fit.

When purchasing the pole, you receive:

• bottom base
• ceiling mount
• ceiling mount washer
• pin for switching modes
• thread cap
• magnetic plate for the base

IMPORTANT! You must provide the exact height from floor to ceiling (mounting point) when placing your order. Do not measure against the wall, as this may result in incorrect dimensions.

In this model, the base is screwed into the floor. The required hole depth is up to 3 cm, while expansion anchors up to 6 cm are sufficient. Anchors for fixing the ceiling mount and floor base must be purchased separately, depending on your mounting surface.

The permanent mount is fixed to the ceiling with screws. The pole itself can be removed at any time. To do so, remove the cotter pin, loosen the expansion thread, and pull the pole out of the mount.

Poles over 4 metres: shipping is priced individually. Transport costs are not included in the pole price and will be quoted separately. We arrange freight via transport exchange or deliver ourselves if installation service is included. Installation is available starting from 7 poles per client. Full details are provided by email.

Custom colour poles: colours are selected from the RAL palette. The colour chart is for reference only – not all colours are available. Please contact us to confirm availability. Orders of at least 3 poles in one colour are priced the same as standard white or black coating.

Low poles with FAST SPIN: if you require enhanced spin for shorter poles, the standard surcharge for additional reinforcement material (to increase weight and stiffness) is 300 PLN gross.

Product includes:

• pole
• bottom base and permanent mount
• tool set: 21 mm open-end wrench, pipe wrench

Studios where our one-piece poles are installed