Rope mounting for dance pole can be used for installation in a place where the ceilings are very high, or simply there is no possibility of installation in the classic way due to poor ceiling construction. 

Rope mounting is safe as long as the installation is done correctly and the place is adapted to the technical requirements for such installation. 

Rope mounting can be used in the installation of poles

• in studios that have high rooms 
• at competitions in halls and halls. It is an alternative to expensive stage contructions. 
• In the open air when we need a high tube and we have the molzivosity to anchor ropes. 

Requirements for installation of pole dance pipe rope system:

• recommended minimum pipe height of 3 meters. 
• in the case of fixing the pole at the height of the base or below, the minimum length of the pipe is 3.5 meters (ropes will take away 0.5 meters from the working height of the pipe, performing figures on top of the pipe will be dangerous.
• Average load per rope or winch = 400 kg
• The angle of attachment of ropes (looking from above) must be the same. When fastening with 3 ropes = 120 degrees, when fastening with 4 ropes = 90 degrees.
• If it is not possible to attach the lower plate to the ground, the points of attachment of ropes (winch) to the walls should be lower than the level of the upper attachment! The lower this point, the less tension the ropes can have.
• If you do not screw the bottom base to the floor, it is recommended that the points of attachment of ropes are not higher than half the height of the pipe. It is then recommended to additionally use a larger base and stick it to the floor with 3M double-sided tape.

 
The rope system can be used for ANY model of M-pole single-piece poles.

When installing two or more poles, the rope system is calculated individually! Pricing of such a system is individual 

Basic set includes 

•  belt/sling (4 pcs x 10 m)
•  4 turnbuckles (cable tensioner)
•  8 carabiners 
• 4 screws with a spike 
•  top plate - adapter with ceiling mounts 

The screws with spikes included in the kit are one of many ways to mount to the wall.