The cable mounting system for pole dance poles can be used in places where ceilings are very high or where traditional installation is not possible due to weak ceiling construction.

Cable installation is safe provided that it is installed correctly and the location meets the technical requirements for this type of setup.

The cable system can be used for pole installations:

• in studios with very high ceilings
• in rooms where the ceiling is weak but the walls are solid
• during competitions in auditoriums and sports halls as an alternative to expensive stage constructions
• outdoors when a tall pole is required and there is a possibility to anchor the cables

Requirements for installing the pole dance cable system:

• recommended minimum pole height: 3 meters
• if the cables are mounted at the height of the base or lower, the minimum pole length should be 3.5 m (the cables will reduce the usable pole height by about 0.5 m, which would make performing moves at the top unsafe).
• average load on each cable or winch = 400 kg
• the angle between the cables (viewed from above) must be equal. With 3 cables = 120 degrees, with 4 cables = 90 degrees.
• if it is not possible to attach the lower plate to the floor, the cable attachment points (winches) on the walls should be placed lower than the upper mounting point. The lower this point is, the less tension will be required in the cables.
• if the lower base is not screwed to the floor, it is recommended that the cable attachment points are no higher than halfway up the pole. In this case, it is also recommended to use a larger base and secure it to the floor using 3M double-sided tape.

The cable system can be used with ANY model of one-piece M-Pole poles.

When installing two or more poles, the cable layout must be calculated individually. The price for such a system is determined individually.

The basic set includes:

• straps / slings (4 pcs x 10 m)
• 4 tensioners (cable tighteners)
• 8 carabiners
• 4 eye bolts
• upper plate – adapter with ceiling mount

The eye bolts included in the set are only one of many possible mounting methods to the wall. The cable system must be attached to stable surfaces capable of withstanding a load of 400 kg.