One-piece pole dance training pole, polished or painted, 42 or 45 mm in diameter, bolted to the ceiling or strutted. For professional use.  

• Instantly change the swivel/static function with a pin, not a screw 

No longer do you have to waste time unscrewing screws to turn a static tube into a rotating one. All you have to do is pull out the pin and it takes a second. In addition, the pin is a magnet that will stick to the base, even if you do not put it in the right places. 

• The top bearing twists to the uneven ceiling in both the non-stick and fixed plate. 

This pole dance tube does not require you to have a perfectly even ceiling. In case of slight unevenness, the tube will adjust itself to the vertical, because the upper plate has a swinging bearing.

• Ability to adapt the pipe to a low room

You can shorten the pipe yourself. To do this, simply remove the upper threaded sleeve from the pipe, and then adjust the length of the pipe to the height of the room by cutting off the excess. There is also no lower limit to the height from which we make pipes. 

• The thickness of the pipe wall adapted to the height of the room

The higher the pipe, the thicker the wall, because long pipes like to bend, so it is important that the pipe by its construction is adapted to the height of the room. 

• The possibility of re-polishing the pipe, or renewal 

The presented pole dance pipe is a classic model made of stainless steel. This solution allows you to remove scratches by re-polishing the surface of the pipe. As a result, despite intensive training, your dance pipe will look like new. You can do it yourself, below are umeiszonych videos how to do it. 

• The lower base, despite the fact that it is not screwed, has the possibility of screwing. 

Sometimes conditions require us to screw not only the ceiling mount, but also the floor plate. If during use it turns out that at your place there are no conditions for the tube to stand without screwing (working floor and working ceiling at the same time, often wooden structures), there is an invisible hole in the base for the screw.

Parameters of the one-piece pole dance pole:

Weight: 10-15 kg, depending on the length of the pole

Lifting capacity: 150 kg 

Diameter of the rod: 42.4 mm

Diameter of ceiling plate/ fixed mount: 20 cm / 8.5 cm 

Diameter of floor base: 15 cm 

Installation/disassembly time: 1-2 minutes

Warranty period: 12 months

Material: polished stainless steel or powder coated steel

Cleaning: With a cloth, any alcohol half and half with water. Do not clean with water alone, because after a few months, black streaks will appear on the surface of polished pipes

Spin-Static Mode Change: Using a pin (clearance between the pin and the hole is 0.5 mm)

Return: No return possible - personalized product

ASSEMBLY INSTRUCTIONS

One-piece dance pole is subject to height adjustment within +6 cm from the value specified in the order. Permissible measurement error is 10 mm. The base has the ability to be screwed to the floor. Screwing the pole to the ceiling is recommended from a height above 320 cm, while screwing the pole to the ceiling and floor is mandatory from a height of 350 cm. 

The fixed bracket is a component that is screwed to the ceiling with screws. The tube, on the other hand, can be pulled out of the fixing at any time and set aside. To do this, pull out the expansion bolt, loosen the expansion thread and pull the tube out of the fixing.

IMPORTANT: When ordering, specify the exact height from the floor to the ceiling (place of installation). The height should not be measured against the wall, as such a measurement may be incorrect. 

Poles painted in "another color" - You choose the color of the poles from the RAL palette. The presented color chart is for reference only. Not all colors are available. Please inquire to check the availability of a specific color. If you order a minimum of 3 poles in the same color, the price for the poles will be the same as for those painted in black or white.

Are you thinking about buying? Do you have questions? Browse the blog posts or contact us - we will help you choose a product that meets your expectations.